Equivalance: The Key to Global OTC Reform
When I first delved into EMIR back in 2012, the importance of ‘equivalence’ didn’t even cross my mind, least of all how the global bit of all this OTC swap reform was going to play out. Given the complexity of what had just landed in your lap, why would it?!
A year or so down the road, being older and wiser, the penny dropped about the global bit and I wrote about it in a blog in October 2013 that considered the true scale of global OTC swap reform.
As I started working through how the global bit might work in practice, I was introduced to ‘extraterritoriality’, which defines the boundaries that each jurisdiction’s regulatory reach extends to. Whilst this is complex subject matter, the problem is relatively simple – if two counterparties from different jurisdictions trade with each other, both counterparties have to comply with their own regulations and so if we consider say, the clearing obligation, you clearly can’t clear a trade twice, as per whatever each jurisdiction’s regulation requires.
The workaround to this problem is ‘equivalence’ and ‘substituted compliance’ and the mechanism for how equivalence and substituted compliance will work, is easy enough on paper – each jurisdiction reviews each other’s regulations, sees if they are largely the same and if so, grants ‘equivalence’ to those regulations which in turn allows said counterparties to chose which regulation the two of them will comply with, effectively ‘substituting compliance’ for one of the counterparties. (For a quick primer on the cross-border application of OTC swap reform (yay!), you can catch up on a previous blog that walked through this.)
And so with 3 years of EMIR now under our belt and a relatively advanced state of play for global OTC swap reform, where are we with regards to equivalence and making the global bit work? Why is implementing equivalence proving so difficult and what is causing all of the headaches?
Well, plenty actually and so by way of example, let me walk you through the process whereby the EC would assess the equivalence of a non-EU country and thus where the hurdles and complexities might lie ahead. I’ve broken this down into 1. how the assessment process actually works and then 2. how equivalence is actually granted and I’ve replicated the ESMA Q&A format so that ESMA can ‘cut and paste’ as and when required!
Equivalence Answer 1
The EC has mandated ESMA to provide it with technical advice on the equivalence between a non-EU country’s regulatory regime and certain aspects of the EU regulatory regime under EMIR. Specifically, the technical advice concerns Article 13(2) (the bit that allows substituted compliance), Article 25(6) (the bit that allows a non-EU CCP to provide services to the EU, subject to it being recognised) and Article 75(1) (the bit that allows a non-EU TR to provide services to the EU, subject to it being recognised).
To simplify this, we have ploughed through all 3 Articles and have come up with the following list of touch points that the EC will need to look at when considering equivalence:
Article 13(2) – Mechanism to avoid duplicative or conflicting rules
Equivalent legal, supervisory and enforcement arrangements of a third country for:
- Clearing obligation
- Reporting obligation
- Non-financial counterparties
- Risk mitigation techniques (timely confirmation / portfolio reconciliation / dispute resolution / portfolio compression / bilateral margin and capital requirements)
- Protection of professional secrecy
- Effective application and enforcement in an equitable and non-distortive manner
Article 25(6) – Recognition of a third-country CCP
Legal and supervisory arrangements to ensure:
- Equivalent CCP authorisation requirements
- Effective supervision and enforcement of those CCPs on an ongoing basis
- Effective equivalent system for the recognition of CCPs
Article 75(1) – Recognition of a third-country TR
Legal and supervisory arrangements to ensure:
- Equivalent TR authorisation requirements
- Effective supervision and enforcement of those TRs on an ongoing basis
- Equivalent guarantees of professional secrecy
So, we make that something like 12 touch points that will need to be considered, for each country being assessed as equivalent.
At a more granular level, we would note that “ESMA has followed an objective-based approach where the capability of the regime in the third country to meet the objectives of the EU Regulation has been as- sessed on a line-by-line analysis of the differences and similarities between the requirements of the third country and those provided for in EMIR”, which gives you an indication as to why equivalence is taking so long!
If you want a taster of what this might involve, the ESMA technical advice for Australia alone amounts to 224 pages of analysis – incredibly, that’s a higher page count than all of EMIR and the first round of 9 technical standards combined. We know – you couldn’t make that up!
Whilst we’ve got your attention, it’s probably also worth noting that equivalence is only concerned with the legal, supervisory and enforcement arrangements of the non-EU country and does not replace any compliance obligations that exist under EMIR. Notably, non-EU CCPs and TRs will still need to be authorised and supervised in accordance with the non-EU regulatory framework determined to be equivalent, cooperation arrangements under Article 25(2)c will still need to be established between the non-EU country and ESMA prior to recognition and non-EU CCPs and TRs will still need to be recognised by ESMA under Article 25(1-5) for non-EU CCPs and Article 77(1-2) for non-EU TRs!
Equivalence Answer 2
Rather than just making an update on the ESMA website (too obvious!), the EC actually requires implementing acts to be drafted and a law to be passed granting equivalence to a non EU country’s regulations.
This may be particularly challenging because not only will the legislative process add at least 6 months to getting anything done, but 6 months could well end up being substantially longer, should the process become log jammed as a result of potentially 18 other countries (reference FSB 9th Progress Report) that the EC may need to review.
Additionally, as identified in the ESMA Q&As Equivalence Question 1, there are at least 12 touch points of the regulations that will each need to be considered for equivalence and so whether the EC will elect to do this in 12 implementing acts, piece meal or en masse is anyone’s guess.
Either way, our back of an envelope calculation would suggest that for 19 countries involved in OTC swap reform, considering 12 touch points of the regulations and with each country assessing every other country, this could result in 3,888 equivalence assessments globally!
You get the idea of just how complex the global bit of OTC swap reform has now become.
Will it ever play out?
It’s a fair question because whilst the larger jurisdictions will likely find a common path to equivalence, it’s hard to see the smaller jurisdictions managing to achieve the same degree of due diligence with their assessment.
- Or if they’ve even got the resources to do it in the first place!
- Or maybe they just don’t bother and we live with asymmetric equivalence?
- Or they just give it a ‘finger-in-the-air’ kind of assessment and hope for the best?
- Or we end up with secondary, non-equivalent, fragmented markets?
Ironically, for all its global bravado, OTC swap reform has actually been implemented in a notably un-global way and so realistically, what are the chances of achieving unqualified global equivalence?
We just don’t know at the moment, which is kind of worrying given the global OTC swap reform regulations that are either live or inflight and that are kind of relying on equivalence being in place!
And so perhaps the question you now need to be thinking about is how globally intertwined is your OTC derivatives operating model and how dependent is your operating model on equivalence actually playing out?
Probably more so than you might realise!
This article was first published in edition 5 of Rocket, our magazine. Download available Rocket editions here, and save your up to date address in your profile to to indicate your interest in receiving a printed copy of the magazine. Copies are also available to purchase and subscribe to via the shop.
To save your address into your profile:
- Visit the home page
- Click Account (in the middle of the row of black buttons)
- Click Edit Profile (in the row of buttons at the top)
- Click Reader (top right)
- There you can see your profile, with a box for your address - complete it accurately, and click Save